Generating a bootable USB flash drive for Kerio Control software appliances

Generating a bootable USB flash drive for Kerio Control software appliances

 

Overview

Kerio Control in the Software Appliance edition is distributed as an installation CD ISO image. The ISO image can be used also to generate a bootable USB flash drive.

All data on the flash drive will be completely overwritten, so be sure to save any files you need elsewhere.

Please follow the instructions according to your operating system:

Windows

  1. Insert the USB flash drive into a USB port on your computer.

  2. Download the kerio-control-installer.iso file.

  3. Download and unpack Image Writer (it does not require installation).

  4. In Image Writer, find the kerio-control-installer.iso file, select your flash drive and click Write.

  5. Eject the flash drive securely and remove it from your computer.

Linux

  1. Insert the USB flash drive into a USB port on your computer.

  2. Run the terminal (console) in the super-user mode (e.g. using commands su or sudo -s — depending on your Linux distribution).

  3. Use the command fdisk -l to detect the USB flash drive name (e.g. /dev/sdb).

  4. Save the drive image to the USB flash drive using this command:

    dd if=kerio-control-installer.iso of=/dev/sdx bs=1M

    replacekerio-control-installer.iso by the real file name and/dev/sdx with the actual device name. It is necessary to enter the physical device (e.g. /dev/sdx), not only a partition (e.g. /dev/sdx1).

     

  5. Use command sync to guarantee finishing all drive operations.

  6. Eject the USB drive safely and remove it from the USB port.

OS X

  1. Insert the USB flash drive into a USB port on your computer.

  2. Run the terminal (Applications → Utilities → Terminal).

  3. Use the command sudo diskutil list to detect the USB flash drive name (e.g. /dev/diskX or/dev/DiskY — mind the letter case).

  4. Use the command sudo diskutil unmountDisk /dev/diskXto unmount the flash drive.

    This is case sensitive.

  5. Save the drive image file to the USB flash drive by using this command:

    sudo dd if=kerio-control-installer.iso of=/dev/disk1 bs=1m

    replace kerio-control-installer.iso by the real file name and /dev/diskXwith the actual device name.

     

  6. Eject the flash drive securely and remove it from your computer.